Відео

It looks like it's from dk-oldies

Good job man

This video has convinced me that I do not have to skill or experience to do it. I will just buy another old PS3 for collection and pass on the broken one. Great vid though, thank you.

Those came out about 3yrs ago on aliexpress.

That was exactly the video I needed to see. My brother purchased three Xbox360s and only one has the RROD. I am new to modding/repair and love your channel. I hope I am able to fix this one like you have shown here.

Nice Console Good Job

That looks like a really really easy repair. That's a huge relief after hearing how fragile and difficult the oem cable is. I look forward to doing this!

can you link me to the service manual for this ps2

I guess I'm glad I never got rid of mine :D It has the CD drive and both are complete with their original boxes and accessories. I never kept track of their values as retro systems (same for my Saturn and Colecovision). The one time I thought something had failed was when CD's started scraping in the drive. I found out that it was just the drive unit had become dislodged from its friction fit mounts on the motherboard. A little jiggle and all was well. A modest collection of cartridges (25 plus the memory cart) and seven CD titles (Baldies, Battlemorph, BrainDead 13 and Highlander, plus the pack-ins that came with the CD unit) round out that corner of my collection.

That site now seems to suck. Nothing is loading to see what errors there are.

Hello my Xbox no works give me green light and then red 😢 its close

To remove scratches the surrounding paintwork is removed and therefore thinning the paint so that next time it's scratched it could go through. It would make more sense to fill in the scratch with lacquer and polish until the excess is removed

Can anyone tell if the purple daughter board has castellated front traces?

Love the that you took a thoughtful step of placing the microfiber cloth down so not to scratch the top when flipping over to remove the screws

scratch doctor wasn't kidding.

my virtual boy has a problem with the screen, Unfortunately, I live in Japan and there is no one here to fix it. 😭

Not gonna lie I somehow have been looking at traces like they are aliens, having a similar issue with a standard ol megadrive and it all clicked how stuff is tested now. Cheers!

Holy hell, you’re using waaaaaaaaay too much product

Scratch doctor did a heck of a job, and Meguiar's compound didn't do too bad either. Out of those two, I'd go with whatever's cheapest and has the least dodgy chemicals in. The orange polishing compound sucks giant arse crack, just makes the plastic look foggy. If all you want to do is make plastic look foggy, just give it a rub over with some grey scotch pad... Good test fella.

Awesome!❤

This guy is good!

The guy is the Mozart of Neogeo fixing. Please post more videos of Neogeo or MVS troubleshooting.

Avviso : Le Flash sono ancora disponibili al prezzo di 15 euro + spedizione , originali AT49LV001

you changed 2 but if the problem doesn't resolve all 8 should be changed? Do you recommend changing all 8?

Great video of the Mod. I did this mod on my Sega Master System 2 as well. Unlike the one you got that has a Sony CXA1145P encoder with the Alex Kidd in Mracle World Built-In.. Mine is a Fujitsu MB3514 Encoder with the Sonic 1 Built-In. The one I opted in for was Console Unleashed's no-wire QSB board option so I didn't have to wire each video signal line. The RGB Video on it is phenomenal. Good work on this mate.

Good job in the restoration my friend 😊

Hey, i just met Stefano and repaired my player, thank you very much @BorderlineOCD

Lol one of the best parts of your videos that always gets me is when you place the caps and at the end you use the birthday horn versus a oven timer bell lol I always wait for it and then crack up

Does the ps3 still work ?

after this cleaning it's gonna be like next gen lol

brilliant and simple information, thank you very much.

Dammit i should've bought the fat ps2 from ebay instead of the slim 😭 i couldve sworn my onimusha 3 was working well in the past i just got my ps2 slim and tried starting onimusha 3 it wouldnt launch 😭 but turok evolution that i bought thats renew on Amazon worked now im scared the ps2 ganes ive orded on eBay might do the same like oninusha 3.

@17:53 that yay! scared me 😂

Love the video man thanks for the advice. I believe I could speak for everyone ,when I say that I am very appreciative of this content. I’m going clean mines too 💜😮‍💨💯

Just bought one of these "cheap," had the exact same problem (at least I THINK all that is wrong is the wobbly USB connector). What a poor design! But a great video. Not sure I have the skills and equipment to fix it.

these things are such junk, love the system but man, MS really fumbled with design choices

I would HIGHLY recommend getting a soldering hot air station with a forced air pump inside, The difference is the air is generated inside the station, and then forced out with a pump, vs forced out of the handle with pretty much a fan. making this upgrade will change your repairs and your confidence working with all board SMD repairs.

*I just wet sanded mine. I started at 800 grit and worked my way to 4,000 grit. Then I used McGuire's with a power ball polisher drill bit tool. Now it looks much better.*

This was so helpful, the 24-inch cable and the folding made it all work. I was able to nest the entire IDE cable in the hard drive tray, no snipping needed. Thank you!

Good job 👏👏

I have a question, why does my laser slide down to the disc spin?like i leave it up and then it goes down to the disc spin.

Any advice? I broke the pad for the positive of my 2200 cap

Think this would work on a motorcycle helmet visor?

Bud this is amazing. Is there anyway that you would take on and xbox for a customer? I'm extremely tech dumb the soldering and all that wouldn't be bad but the filing making and flashing is beyond me.

I did with q tip and water is it safe??

Mate this video was sensational!! I appreciate your time showing us some skills!!!!

How do you go about transferring data to a new one?

Is this valid for the “piano black” parts of a car?

I didn't have a grimmel but I used it l hand polished and it didn't work on my black plastic also I've had found online it's just not to use on black plastic